You would use the neoStat-e V3 that is supplied with a 3M remote floor sensor and is capable of switching up to 16A.
Please note that if you have an existing thermostat fitted, you would need to check if the existing floor probe is compatible. The neoStat-e V3 will work with the following floor probes:
- 10K3A1
- 12K3A1
- 15K3A1
You can purchase this via Heatmiser Shop or through a distributor.
The neoStat-e V3 will also work with a neoHub Gen 2 or a neoHub Gen 3. Please note that the neoStat-e V3 will not work with the original neoHub.