I am afraid this is not possible, however you can almost do it. You would need a 10 minute off period around midnight.
However please be aware that the longer you have TIMER ON, the more likely it is going to increase your energy costs.
You would need to set the timer to be on 00:05 for TIMER ON and 23:55 for TIMER OFF, then blank out the other times by setting them to --:--
On the time clock:
- Go to EDIT using the left and right keys and press tick
- You will see the days of the week highlighted at the top, you can use the left and right keys to move these, press tick.
- You will then see 1 2 3 4 at the bottom of the screen,
- 1 will be flashing at the bottom of the screen
- Press tick to enter the settings
- TIMER ON will be highlighted
- Using the up and down keys, set the hours to 00, press tick
- Using the up and down keys, set the minutes to 05, press tick
- TIMER OFF will be highlighted
- Using the up and down keys, set the hours to 23, press tick
- Using the up and down keys, set the minutes to 55, press tick
- Press the right arrow to move the flashing 1 to 2
- 2 will be flashing at the bottom of the screen
- Press tick to enter the settings
- TIMER ON will be highlighted
- Using the up and down keys, go to 24 hours and you should see --
- Press tick
- Set the minutes to --
- Press tick
- Press the right arrow to move the flashing 2 to 3
- 3 will be flashing at the bottom of the screen
- Use the right arrow to move to 3 and if needed, repeat process for time 2, times should be --:--
- 4 will be flashing at the bottom of the screen
- Use the right arrow to move to 4 and if needed, repeat process for time 2, times should be --:--
- Press the right arrow to move to DONE which will start to flash and press tick
Repeat the process for any other days by going to EDIT and pressing the right arrow to change days.
If you have access to the Heatmiser Neo App, you can also edit the settings via the App.