All of the following Neo work with the neoHub and you can mix these on the same system.
- neoAir V3 is our battery powered wireless version. It works with the 2 Channel Receiver RF Switch V2 or the 8 Zone Wireless wiring centre UH8-RF V2
- neoStat V3s our 230v powered programmable thermostat. It can replace any 3 wire and earth thermostat.
- neoStat-e V3 is our electric floor heating model. It can switch up to 16A.
- neoStat-hw V3 is our hot water programmer model. It offers changeover contacts for valves that require power to open and power to close
- neoStat-HC is our heating and cooling fan coil thermostat for a 3 speed fan at 230v
- neoStat-HC1 heating and fan coil thermostat
- neoStat Touch is a touchscreen version of the neoStat V2, however can be used to control a zone of heating plus a timer zone like hot water
- neoStat Touch-e is a touchscreen version of the neoStat V3, it can be used to control a zone of electric underfloor heating, an electric towel rail or electric radiators.
- neoStat Pro a stripped back version of the neoStat with the future ability to do underfloor heating and cooling (still in development)
- neoFlo electronic TRVs which can control your heating via a receiver and the neoHub Gen 3