On the neoStat v1 (Blue Display)
- Navigate to Setup and Press Tick
- Use Up/Down key until you see the small number 06
- Set the required setting here - see below
- Press Tick
On the neoStat v2 (White Display)
- Navigate to Power Icon and press Tick for 5s
- Navigate to Setup and Press Tick
- Use Up/Down key until you see the small number 06
- Set the required setting here - see below
- Press Tick
Sensor Modes
- 00 = Built in sensor
- 01 = Remote Air Sensor
- 02 = Floor Sensor Only
- 03 = Built in Air & Floor Sensor
- 04 = Remote Air & Floor Sensor
To view the Floor Temperature (When in Air & Temp Mode)
Press and Hold the Left/Right keys for 5 seconds