Frost Mode/Standby is used when you are away from home.
When this mode is active, your neoStat will control to your Frost Mode temperature. This setting will ensure your home is protected against frost damage.
Your comfort levels which are in EDIT will be disabled while in Frost Mode and is usually the setting to use during the summer months when heating is not required.
Activating Frost Mode
neoStat v1
Navigate to POWER icon and press TICK
You will see this icon when Frost Mode is active.
To cancel, repeat the step
neoStat v2
Navigate to POWER icon and press TICK
You will see this icon when Frost Mode is active.
To cancel, repeat the step
Adjusting the Frost Mode Temperature
The default temperature is 12C but you can vary this from 07-17C
Follow these steps to adjust this temperature.
neoStat v1
- Navigate to SETUP
- Press TICK
- Use the Up/Down keys to select the small number 03
- Press Tick
- Use the Up/Down keys to set the desired frost mode temperature
- Press Tick
neoStat v2
- Navigate to POWER icon and press hold for 5 seconds
- Navigate to SETUP
- Press TICK
- Use the Up/Down keys to select the small number 03
- Press Tick
- Use the Up/Down keys to set the desired frost mode temperature
- Press Tick