The neoStat offers three program mode options;
- Weekday/Weekend programming,
- 7 Day programming
- 24 Hour programming.
When thermostats are connected to the mesh network, the program mode for
the system is configured by using the neoApp.
The thermostat is supplied with comfort levels already programmed, but these can be changed easily.
The default times and temperature settings are;
- 07:00 - 21°C (Wake)
- 09:00 - 16°C (Leave)
- 16:00 - 21°C (Return)
- 22:00 - 16°C (Sleep)
If you only want to use 2 levels, you should program the unused levels to --:--
For Weekday/Weekend programming, the four comfort levels are the same for Mon-Fri, but can be different for Sat-Sun.
For 7 Day programming each day of the week can have four different comfort levels.
In 24 Hour mode all days are programmed with the same comfort levels.
- To program the comfort levels, use the Left/Right keys to scroll to EDIT
- Press TICK
- Use the Left/Right keys to select day/period of the week (this will flash)
- Press TICK to confirm
- WAKE will now flash and the current time and temperature will be shown.
- Press TICK to alter WAKE
- Use the Up/Down keys to set the HOURS
- Press TICK
- Use the Up/Down keys to set the MINUTES
- Press TICK
- Use the Up/Down keys to set the temperature
- Press TICK
- Press the right arrow key
- LEAVE will now flash and the current settings will be displayed
- Press TICK to alter LEAVE
- For any unused periods set time to --.--
- Use the Left/Right keys to scroll to DONE and press TICK