When you do not want a schedule on the thermostat and you just want up and down control.
Please note that if you are using the neoApp, you would need to change the Programme Mode in Settings to Non Programmable. You cannot do this on the thermostats when connected to the neoApp.
neoStat V2 (white screen)
- Use the left and right keys to go to the power icon on the left
- Press and hold tick until you see SETUP
- Press tick
- Press the up arrow to make the small number 12
- Press the left arrow to make the large number 00
- Press Tick
Edit will no longer be on the screen and the thermostat's comfort levels will be disabled, in other words, you can turn the heating up and down manually on the thermostat.
neoStat V1 (white screen)
- Use the left and right keys to move the box to SETUP on the right
- Press tick
- Press the up arrow to make the small number 12
- Press the left arrow to make the large number 00
- Press tick
If you are using the Heatmiser Neo App (Orange)
- On the App go to Settings
- Select Programme Mode
- Select Non Programmable
If you are using the IMI Heatmiser Neo App (Grey)
- Press the Settings Button on the bottom right hand corner of the screen
- Click on Scheduling
- Select the option suitable for you
- Press Save