After pairing the neoHub,
- Press Add neoStat
- Enter the Zone Title or select from the available titles
- Press Next
- On the neoStat, Navigate to Setup
- Press Tick twice
- Your neoStat should show the radio signal on screen and the app should indicate the zone has been added successfully.
Adding a zone inside the neoApp
- Press Home, so the Home button is orange
- Press Edit, in the top right corner of the screen.
- Press Add Zone
- Enter the Zone Title or select from the available titles
- Press Next
- On the neoStat, Navigate to Setup
- Press Tick twice
- Your neoStat should show the radio signal on screen and the app should indicate the zone has been added successfully.
If your neoStat doesn't pair, try the following steps.
On the neoStat, navigate to the SETUP and Hold the tick key for 10 seconds. You should see all icons appear on screen. Your neoStat has now been reset. Please re-try the steps above.