After pairing the neoHub,
- Press Add neoStat
- Enter the Zone Title or select from the available titles
- Press Next
- On the neoStat v2, navigate to the power Icon and hold tick for 5 seconds
- Navigate to Setup
- Press Tick twice
- Your neoStat should show the radio signal on screen and the app should indicate the zone has been added successfully.
Adding a zone inside the neoApp
- Press Home, so the Home button is orange
- Press Edit, in the top right corner of the screen.
- Press Add Zone
- Enter the Zone Title or select from the available titles
- Press Next
- On the neoStat v2, navigate to the power Icon and hold tick for 5 seconds
- Navigate to Setup
- Press Tick twice
- Your neoStat should show the radio signal on screen and the app should indicate the zone has been added successfully.
If your neoStat doesn't pair, try the following steps.
On the neoStat, navigate to the Power Icon and Hold the tick key for 5 seconds. When you see Setup on screen, press and hold for 10 seconds until you see all icons appear. Your neoStat has now been reset. Please re-try the steps above.