Frost Protect mode will bypass your programmed heating levels but will maintain a low temperature in your home. Only when your home drops below this temperature will the heating be activated.
The default frost protect temperature is 12C but this can be adjusted from 7-17C
Slimline &Touch Series
- Enable: Press the Power Key once. You will see the frost icon appear.
- To Cancel: Press the Power Key again. You will see the frost icon disappear.
- To adjust on a Slimline tap the power button once so that the snowflake appears, and then tap the arrow up or down, and it will start on the current frost temperature, if you want to change this use the up/down arrow and when you get to the temperature you want tap the A button.
- To adjust on a Touch tap the power button once so that the snowflake appears, and then tap the arrow up or down, and it will start on the current frost temperature, if you want to change this use the up/down arrow and when you get to the temperature you want tap the done button.
Edge & Neo
- Enable: Navigate to the Power Menu and Press Tick. You will see the frost icon appear.
- To Cancel: Navigate to the Power Menu and Press Tick again. You will see the frost icon disappear.
- To adjust a Neo use the left or right arrows to scroll to the power icon tap the tick button on the power icon once so that the snowflake appears, and then tap the arrow up or down, and it will start on the current frost temperature, if you want to change this use the up/down arrow and when you get to the temperature you want tap the tick button.
- To adjust Edge use the left or right arrows to scroll to the power icon tap the tick button on the power icon once so that the snowflake appears, and then tap the arrow up or down, and it will start on the current frost temperature, if you want to change this use the up/down arrow and when you get to the temperature you want tap the tick button.