Pairing Slimline RF V3 with UH8-RF wiring centre

You can check if it is a Slimline RF V3 by doing the following:

• Hold down the power button to turn the thermostat off
• Hold down the clock button until you see 00 01 on the screen
• Keep tapping the clock button
• If it loops round at 10 it is a Slimline RF V3
• If it loops round at 17 then it is a Slimline RF or Slimline RF V2

You will need to get the Channel number of the UH8-RF

See Get UH8-RF Channel number

While the unit is switched off

• Hold down H until you see P1
• Press clock to go to P2
• Press H
• Use the up and down keys to set the Channel number
• Press H
• Use the up and down keys to see the zone number
• Press H
• Use the up and down keys to set RA if it is a radiator system or UF is it is an underfloor heating system.
• Tap A
• Tap power button to turn on

Turn heating up on thermostat to test.