What is failsafe and how does it work
What causes my UH8-RF/RF Switch to come on unexpectedly ?
To turn on failsafe on a neoAir V1 (blue background, SETUP on the right hand corner).
- Go to SETUP on the right hand side
- Press tick
- Press the down arrow to make small number P3
- Press tick
- Press right arrow to make large number 01
- Press tick
- Turn heating up and down a few times to make sure that the receiver light comes on.
To turn on failsafe on a neoAir V2, neoAir V2m or a neoAir V3 (white background, no setup on bottom right corner)
- Go to the power icon on the left
- Press and hold tick until you see SETUP
- Press tick
- Press down arrow to make small number P3
- Press tick
- Press right arrow to make large number 01
- Press tick
- Turn heating up and down a few times ensuring receiver light turns on and off.